Ebac RM40 Dehumidifier

Ebac RM40 Dehumidifier

The RM40 Dehumidifier is a recent addition to the EIPL range of Rotational Moulded Polyethylene Housings. This super durable housing, and EIPL’s years of experience with refrigeration systems, ensures the product not only looks the part, but is also capable of outperforming competitors models of similar capacities. The RM40 is fitted with Hot Gas Defrost unique EEVC system, ensures the optimum extraction across the full operating spectrum. Fitted with Humidistat and water collection tank. An optional condensate pump &. 7.8m drain hose is available for a more permanent installation

Typical Extraction: 10L/Day at 27c & 60%rh
Nominal Effective Volume: 100m3

£329 inc vat and 2/3 day delivery.

Next day delivery + £16 (added at checkout if selected)

Brochure

Specifications

 

Height (mm)

62

Width (mm)

385

Depth (mm)

360

Weight(kgs)

26

Voltage

230

Phase

1

Frequency(Hz)

50

Power(kW)

0.25

Current(A)

2

Airflow(m3/hr)

150

Noise Level(dba)

51

Effective Volume(m3)

100

Typical Extraction(l/d)

10

Min Operating Temp (°C)

3

Max OperatingTemp (°C)

35

 

 Features

 

 

On/Off Control Via Humidistat

Y

Carrying Handles

Y

Reverse Cycle Defrost

Y

Electronic Defrost Timer

Y

Compressor Type

Rotary

Pump Purge Switch

Y

Washable Air Filter

N

Refrigerant Type

R134a

Free Standing

Y

Collapsible Handles

N

Quiet Operation

Y

Electronic Touch Pad Controls

N

Condensate Pump (optional)

Y

Cable / Hose Wrap

N

Moulded Mains Plug

Y

Polyethylene Housing

Y

Galvanised Steel Chassis

Y

THE PROBLEM
EIPL are a recognized world wide supplier of flood restoration drying equipment. We offer a variety of dehumidifiers and air movers to remove water and assist with drying areas after water damage. Following a flood, whether it is in your basement or office, it’s vitally important to restore the damaged area to good order as soon as possible to protect your health from micro-organisms, mold and bacteria that may grow and ultimately prevent further damage. Whether it is a flash flood, heavy rains or water main break, EIPL have the equipment to handle the harshest environments and assist with proper restoration. 

EIPL’S ROTAMOULDED RANGE
When EIPL launch a product, you can be sure its aimed at specific customers needs. The RM40 is the first in a new generation of rotamoulded dehumidifiers specifically designed to meet the Cleaning & Restoration Industries specifications. The rotamoulded polyethylene housing is dent resistant and offers superior durability, while also protecting furnishings when in use. Coupled with the ruggedness and EIPL’s high quality standards, this model forms the base of a new exciting generation of polyethylene products. 

SAVE TIME AND MONEY
No more worries of forgetting to empty buckets, due to customer demands the RM range of products incorporates optional high capacity condensate pumps. The 3m maximum pump height will ensure no installation is too difficult. Install, connect to a permanent drain, and forget until the job is complete. With the aid of a purge facility, all residue water can be drained from the pump tank prior to moving the machine therefore eliminating the chances of spillage.

LOW TEMPERATURE OPERATION
The RM40 is equipped with a “Reverse Cycle” defrost system, ensuring a quick and efficient clearing of ice from the coil, allowing a minimum operating temperature of 3°C. 

PROVEN PERFORMANCE  The EIPL RM40 is a rugged, yet mobile piece of equipment that will operate under extreme conditions and pull large amounts of moisture from the air. Whenever there is a need for fast dependable, energy-efficient drying, EIPL can provide the answer. The high efficiency Rotary compressor ensures the maximum extraction with the lowest running costs.